NORWAY · WELLBORES · NPDID 431

34/10-13

Exploration · Appraisal · P&A · Oil · Den norske stats oljeselskap a.s · Gullfaks · PL 050

14 documents: reports, logs, and plots →

Core 16

Core 16 of 34/10-13 was cut from 3,373.5 to 3,390.1 m, 16.6 m in the Hegre Gp. The Directorate lists core samples from it as available.

16.6
m cored · 3,373.5 to 3,390.1
3
photographs
4
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,373.53,390.1 m3,3763,3783,3803,3823,3843,3863,388Hegre Gp, 3,373.5 to 3,390.1 mHegre GpCore 16, 3,373.5 to 3,390.1 mCore 1616.6 m3,374 to 3,378 m: 1 photo. Open.13,379 to 3,385 m: 1 photo. Open.13,385 to 3,390 m: 1 photo. Open.1

Photographs of this core

3 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Hegre Gp3,373.53,390.116.6

Every formation top in 34/10-13 →

Logs run across it

4 RUNS COVERING PART OF THE INTERVAL

  • FDC CNL GR CALcompensated formation density · compensated neutron log · gamma ray · caliper299 to 3,394 m
  • ISF SON GR SP MSFLinduction spherically focused log · sonic · gamma ray · spontaneous potential · micro-spherically focused log299 to 3,393 m
  • CYBERDIPcomputed dipmeter1,717 to 3,394 m
  • DIRdirectional survey1,720 to 3,394 m

Logs, casing, and the files you can open →

Core and petrography reports on file for the well

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/431/cores/16, documented in the API reference.