NORWAY · WELLBORES · NPDID 4765

25/4-8

Exploration · Appraisal · P&A · Oil/gas · Marathon Petroleum Norge AS · Alvheim · PL 203

5 documents: reports, logs, and plots →

Core 2

Core 2 of 25/4-8 was cut from 2,109 to 2,135.6 m, 26.6 m in the Lista Fm and Heimdal Fm. The Directorate lists core samples from it as available.

26.6
m cored · 2,109 to 2,135.6
1
test or fluid sample across it
1
formation boundary crossed
3
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,1092,135.6 m2,1152,1202,1252,130Lista Fm, 2,109 to 2,113 mLista FmHeimdal Fm, 2,113 to 2,135.6 mHeimdal FmCore 2, 2,109 to 2,135.6 mCore 226.6 m

What it was cut through

UnitFrom, mTo, mCore in it, m
Lista Fm2,1092,1134
Heimdal Fm2,1132,135.622.6

Every formation top in 25/4-8 →

Tests and fluid samples across it

  • DST sample2,120 to — mOil · sample available: yes

Full test results for the well →

Logs run across it

3 RUNS COVERING PART OF THE INTERVAL

  • PEX AIT DSI HNGSPlatform Express (resistivity, density, neutron) · array induction tool · dipole shear sonic imager · spectral gamma ray (hostile environment)145 to 2,284 m
  • VSI GRversatile seismic imager · gamma ray631 to 2,280 m
  • MDT GRmodular formation dynamics tester · gamma ray2,092 to 2,182 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/4765/cores/2, documented in the API reference.