NORWAY · WELLBORES · NPDID 506

30/7-8 R

Exploration · Appraisal · P&A · Gas/condensate · Norsk Hydro Produksjon AS · Martin Linge · PL 040

5 documents: reports, logs, and plots →

30/7-8 R is an appraisal exploration wellbore in the North Sea, drilled by Norsk Hydro Produksjon AS, entered Sep 23, 1981, to 4,813 m in the Hegre Gp.

Discovery 30/7-6 Martin Linge · On the map →

4,813
m total depth · 4,812 m vertical
103
m water depth
Sep 23, 1981
entered · completed Jan 29, 1982
Hegre Gp
at total depth · Late Triassic
105.4
m of core in 10 cores
160
°C bottom-hole temperature

SODIR FACTPAGES · RECORD UPDATED NOV 4, 2026 · RELEASED JUL 5, 2016

On file for this wellbore

What the Directorate holds from this wellbore. Each opens the section that lists it.

Drilling

Drilling facility
TREASURE SEEKER · Semisub steel
Drilling days
127
Kelly bushing elevation
25 m
Maximum inclination
10.75°
Drilling permit
269-L2
Licensing round
3
Plugged and abandoned
Jan 29, 1982
Core samples available
Yes
Cuttings samples available
Yes
Position · ED50
60.49530° N, 2.00571° E
Hydrocarbons in
Tarbert Fm · Middle Jurassic

Well history

WRITTEN BY THE NORWEGIAN OFFSHORE DIRECTORATE

General

Well 30/7-8 R is a re-entry of well 30/7-8, which was suspended with TD at 4287 m due to technical problems, without fulfilling the well objectives. The well was drilled on the Norwegian part of the Shetland Basin in the northern North Sea. The objectives were to test the hydrocarbon potential in the Middle Jurassic Brent Group (primary objective), and the Early Jurassic Cook Formation and Statfjord Group (secondary objectives).

Operations and results

Appraisal well 30/7-8 was re-entered with the semi-submersible installation Treasure Seeker on 23 November 1980. It was kicked off at 3755 m and drilled to final TD at 4813 m in the Late Triassic Hegre Group. No significant problem was encountered in the operations. The well was drilled with Spersene/XP-20/Resinex/Drispac water based mud from kick-off to TD.

The primary target reservoir, Tarbert Formation came in at 4058 m. It contained gas condensate with a gas/water contact at 4112 +/- 5 m, based on pressure gradients. Shows were described on cuttings and cores over the interval 4489.3 to 4555 m in the Statfjord Group, Nansen Formation.

Ten cores were cut in the well. Cores 1 - 8 were cut from 4062.3 m to 4159.3 m in the primary target Tarbert Formation sandstones, while cores nine and ten were cut in the intervals 4489.3 to 4502.5 m and 4527.1 to 4540.6 m, both in the Statfjord Group. The core depths are 4-5 m deeper than the logger depths. RFT fluid samples from 4105 m recovered gas, condensate, water and mud filtrate.

The well was permanently abandoned on 29 January 1982 as a gas/condensate discovery.

Testing

Around this wellbore

This wellbore on Sodir FactPages →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Depths are metres along the wellbore from the kelly bushing unless a row gives its own unit; older cores are filed in feet. A zero the Directorate files for an unmeasured pressure, density, or temperature is shown as a dash.

Developers: this page as JSON is GET /v1/data/norway/wells/506, documented in the API reference.