NORWAY · WELLBORES · NPDID 515

17/9-1 R

Exploration · Wildcat · P&A · Dry · Esso Exploration and Production Norway A/S · PL 002

4 documents: reports, logs, and plots →

Core 1

Core 1 of 17/9-1 R was cut from 10,082 to 10,098 ft, 16 ft in the Skagerrak Fm. The Directorate lists core samples from it as available.

16
ft cored · 10,082 to 10,098
9
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 3,073 TO 3,077.9 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS10,08210,098 ft10,08510,09010,095Skagerrak Fm, 3,073 to 3,077.9 mSkagerrak FmCore 1, 10,082 to 10,098 ftCore 116 ft

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Skagerrak Fm3,0733,077.94.9

Every formation top in 17/9-1 R →

Logs run across it

9 RUNS COVERING PART OF THE INTERVAL

  • VELOCITYvelocity (check-shot) survey410 to 3,156 m
  • CDM2,113 to 3,158 m
  • CDM AP2,113 to 3,158 m
  • CDM FP2,113 to 3,158 m
  • CDM PP2,113 to 3,158 m
  • FDC CNLcompensated formation density · compensated neutron log2,113 to 3,158 m
  • BHC-Cborehole-compensated sonic2,545 to 3,158 m
  • DILdual induction log2,545 to 3,158 m
  • IESinduction electrical survey2,545 to 3,158 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/515/cores/1, documented in the API reference.