What was run in 6504/5-1 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
Logs you can open: composite and completion logs on file
- Composite logpdf · 519 KB
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m | Composite log for the well |
|---|---|---|---|
| MWD - GR RES DIR SON ECDMWD measurement while drilling · GR gamma ray · RES resistivity · DIR directional survey · SON sonic · ECD equivalent circulating density | 1,600 | 3,521 | On file: open → |
| EDTC MSIP HRLA HNGS ECS PEXEDTC telemetry cartridge with gamma ray · MSIP modular sonic imaging platform (Sonic Scanner) · HRLA high-resolution laterolog array · HNGS spectral gamma ray (hostile environment) · ECS elemental capture spectroscopy · PEX Platform Express (resistivity, density, neutron) | 1,945 | 2,880 | On file: open → |
| VSI GRVSI versatile seismic imager · GR gamma ray | 1,960 | 3,996 | On file: open → |
| MSCT GRMSCT mechanical sidewall coring tool · GR gamma ray | 1,996 | 2,828 | On file: open → |
| GR HRLA DSI PPCGR gamma ray · HRLA high-resolution laterolog array · DSI dipole shear sonic imager · PPC powered positioning caliper | 3,299 | 4,138 | On file: open → |
| GR HRLA TLD CNL ECS HNGSGR gamma ray · HRLA high-resolution laterolog array · TLD three-detector lithology density · CNL compensated neutron log · ECS elemental capture spectroscopy · HNGS spectral gamma ray (hostile environment) | 3,512 | 4,085 | On file: open → |
| MWD - GR RES DIR ECDMWD measurement while drilling · GR gamma ray · RES resistivity · DIR directional survey · ECD equivalent circulating density | 3,521 | 3,620 | On file: open → |
| MSCT GRMSCT mechanical sidewall coring tool · GR gamma ray | 3,548 | 3,925 | On file: open → |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 1,240 | 36 | 1,245 | 0 | LOT |
| Surf.cond. | 20 | 1,591 | 26 | 1,596 | 1.2 | LOT |
| Interm. | 13 3/8 | 1,950 | 17 1/2 | 1,955 | 1.27 | LOT |
| Interm. | 9 5/8 | 3,091 | 12 1/4 | 3,095 | 1.56 | LOT |
| Liner | 7 | 3,510 | 8 1/2 | 3,521 | 0 | LOT |
| Open hole | — | 4,170 | 5 7/8 | 4,170 | 0 | LOT |
Drilling mud
17 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 1,208 | 1.12 | 12 | 0 | Formate polymer |
| 1,498 | 1.11 | 12 | 0 | Formate polymer |
| 1,600 | 1.03 | 0 | 0 | Spud mud |
| 1,656 | 1.12 | 12 | 0 | Ultradril dw |
| 1,792 | 1.2 | 12 | 0 | Formate polymer |
| 1,963 | 1.12 | 16 | 0 | Ultradril dw |
| 1,966 | 1.2 | 10 | 0 | Formate polymer |
| 2,347 | 1.2 | 10 | 0 | Formate polymer |
| 3,100 | 1.21 | 12 | 0 | Formate polymer |
| 3,191 | 1.27 | 13 | 0 | Formate polymer |
| 3,508 | 1.48 | 19 | 0 | Formate polymer |
| 3,521 | 1.55 | 21 | 0 | Formate polymer |
| 3,524 | 1.55 | 18 | 0 | Formate polymer |
| 3,619 | 1.57 | 20 | 0 | Formate polymer |
| 3,993 | 1.57 | 20 | 0 | Formate polymer |
| 4,005 | 1.57 | 21 | 0 | Formate polymer |
| 4,166 | 1.6 | 18 | 0 | Formate polymer |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. The composite log is one file for the whole well. The Directorate does not say which runs or depths it draws on, so the link is the same on every row.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/5518, documented in the API reference.