NORWAY · WELLBORES · NPDID 56

30/6-10 A

Exploration · Appraisal · P&A · Oil/gas · Norsk Hydro Produksjon AS · Oseberg · PL 053

8 documents: reports, logs, and plots →

What was run in 30/6-10 A and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
FDC CNLFDC compensated formation density · CNL compensated neutron log1,7682,650
HDTHDT high-resolution dipmeter1,7862,654
ISF SONISF induction spherically focused log · SON sonic1,7862,654
NGTNGT natural gamma ray spectrometry2,3302,640
DLL MSFLDLL dual laterolog · MSFL micro-spherically focused log2,3402,648
RFTRFT repeat formation tester2,4812,607
RFTRFT repeat formation tester2,5922,592
RFTRFT repeat formation tester2,6052,605

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30219362200LOT
Surf.cond.20949269701.56LOT
Interm.13 3/81,78817 1/21,8031.59LOT
Interm.13 3/82,13817 1/22,4321.79LOT
Interm.9 5/82,65212 1/42,6560LOT

Drilling mud

3 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
2,0201.35540waterbased
2,6301.36530waterbased
2,6501.32550waterbased

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/56, documented in the API reference.