NORWAY · WELLBORES · NPDID 5612
16/1-8
Exploration · Wildcat · Suspended · Oil · Lundin Norway AS · Edvard Grieg · PL 338
What was run in 16/1-8 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
Logs you can open: composite and completion logs on file
- Composite logpdf · 392 KB
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m | Composite log for the well |
|---|---|---|---|
| MWD LWD - GR RES PESSMWD measurement while drilling · LWD logging while drilling · GR gamma ray · RES resistivity | 133 | 1,194 | On file: open → |
| VSPVSP vertical seismic profile | 335 | 2,173 | On file: open → |
| MWD LWD - GR RES PR DENS POR SONMWD measurement while drilling · LWD logging while drilling · GR gamma ray · RES resistivity · DENS density · POR porosity · SON sonic | 1,196 | 2,200 | On file: open → |
| MSCTMSCT mechanical sidewall coring tool | 1,350 | 1,959 | On file: open → |
| CMR MDTCMR combinable magnetic resonance · MDT modular formation dynamics tester | 1,875 | 2,060 | On file: open → |
| FMI MSIPFMI formation micro-imager · MSIP modular sonic imaging platform (Sonic Scanner) | 1,886 | 2,060 | On file: open → |
| CMR HRLA PEX ECSCMR combinable magnetic resonance · HRLA high-resolution laterolog array · PEX Platform Express (resistivity, density, neutron) · ECS elemental capture spectroscopy | 1,900 | 2,195 | On file: open → |
| MSCTMSCT mechanical sidewall coring tool | 1,906 | 2,010 | On file: open → |
| MSCTMSCT mechanical sidewall coring tool | 1,923 | 1,939 | On file: open → |
| MDTMDT modular formation dynamics tester | 1,933 | 1,939 | On file: open → |
| MSCTMSCT mechanical sidewall coring tool | 1,940 | 2,115 | On file: open → |
| MSCTMSCT mechanical sidewall coring tool | 1,951 | 1,957 | On file: open → |
| MDTMDT modular formation dynamics tester | 1,952 | 1,956 | On file: open → |
| MSCTMSCT mechanical sidewall coring tool | 1,958 | 2,110 | On file: open → |
| MDTMDT modular formation dynamics tester | 1,978 | 1,939 | On file: open → |
Drilling mud
3 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 180 | 0 | 110 | 0 | Water based |
| 212 | 1.25 | 65 | 0 | Water based |
| 220 | 0 | 110 | 0 | Water based |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. The composite log is one file for the whole well. The Directorate does not say which runs or depths it draws on, so the link is the same on every row.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/5612, documented in the API reference.