NORWAY · WELLBORES · NPDID 5842
15/5-7
Exploration · Appraisal · P&A · Oil · StatoilHydro ASA · Gina Krog · PL 048
Core 2
Core 2 of 15/5-7 was cut from 3,880.5 to 3,927.4 m, 46.9 m in the Hugin Fm and Sleipner Fm. The Directorate lists core samples from it as available.
- 46.9
- m cored · 3,880.5 to 3,927.4
- 1
- formation boundary crossed
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Hugin Fm | 3,880.5 | 3,919 | 38.5 |
| Sleipner Fm | 3,919 | 3,927.4 | 8.4 |
Palynology slides made from core
0 IN THE INTERVAL
16 more slides were made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- VSPvertical seismic profile690 to 4,010 m
- MWD - ARCVRES9 PPmeasurement while drilling · arcVISION array resistivity1,045 to 4,037 m
- DSI FMIdipole shear sonic imager · formation micro-imager2,250 to 4,000 m
- PEX HRLAPlatform Express (resistivity, density, neutron) · high-resolution laterolog array2,600 to 4,025 m
- MDTmodular formation dynamics tester3,825 to 4,000 m
- DP SAMPLE3,828 to 3,883 m
- MDT MINIDSTmodular formation dynamics tester3,882 to 3,882 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/5842/cores/2, documented in the API reference.