NORWAY · WELLBORES · NPDID 5842

15/5-7

Exploration · Appraisal · P&A · Oil · StatoilHydro ASA · Gina Krog · PL 048

2 documents: reports, logs, and plots →

Core 3

Core 3 of 15/5-7 was cut from 3,927.4 to 3,940 m, 12.6 m in the Sleipner Fm. The Directorate lists core samples from it as available.

12.6
m cored · 3,927.4 to 3,940
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,927.43,940 m3,9303,9323,9343,9363,938Sleipner Fm, 3,927.4 to 3,940 mSleipner FmCore 3, 3,927.4 to 3,940 mCore 312.6 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Sleipner Fm3,927.43,94012.6

Every formation top in 15/5-7 →

Palynology slides made from core

0 IN THE INTERVAL

6 more slides were made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • VSPvertical seismic profile690 to 4,010 m
  • MWD - ARCVRES9 PPmeasurement while drilling · arcVISION array resistivity1,045 to 4,037 m
  • DSI FMIdipole shear sonic imager · formation micro-imager2,250 to 4,000 m
  • PEX HRLAPlatform Express (resistivity, density, neutron) · high-resolution laterolog array2,600 to 4,025 m
  • MDTmodular formation dynamics tester3,825 to 4,000 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/5842/cores/3, documented in the API reference.