NORWAY · WELLBORES · NPDID 5980
6506/9-1
Exploration · Appraisal · P&A · Gas · Total E&P Norge AS · PL 211 B
Core 2
Core 2 of 6506/9-1 was cut from 5,316.6 to 5,353.2 m, 36.6 m in the Ile Fm. The Directorate lists core samples from it as available.
- 36.6
- m cored · 5,316.6 to 5,353.2
- 9
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Ile Fm | 5,316.6 | 5,353.2 | 36.6 |
Logs run across it
9 RUNS COVERING PART OF THE INTERVAL
- QAST-VSPvertical seismic profile511 to 5,575 m
- LWD - GR RES PWD DIRlogging while drilling · gamma ray · resistivity · pressure while drilling · directional survey564 to 5,664 m
- PPC HDSI PPC HNGS RDTC ECRIpowered positioning caliper · spectral gamma ray (hostile environment)5,006 to 5,662 m
- QAIT QSLT HTGC ECRI5,006 to 5,663 m
- QLDT QCNT GR ECRIgamma ray5,006 to 5,665 m
- XPT HTGC ECRIformation pressure tester (PressureXpress)5,294 to 5,541 m
- XPT HTGC ECRIformation pressure tester (PressureXpress)5,294 to 5,655 m
- PQ HY PO SC MS GR ECRIgamma ray5,341 to 5,538 m
- PQ HY PO SC MS GR ECRIgamma ray5,341 to 5,341 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/5980/cores/2, documented in the API reference.