NORWAY · WELLBORES · NPDID 5980

6506/9-1

Exploration · Appraisal · P&A · Gas · Total E&P Norge AS · PL 211 B

2 documents: reports, logs, and plots →

Core 3

Core 3 of 6506/9-1 was cut from 5,446.8 to 5,501.7 m, 54.9 m in the Tilje Fm. The Directorate lists core samples from it as available.

54.9
m cored · 5,446.8 to 5,501.7
1
test or fluid sample across it
9
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS5,446.85,501.7 m5,4605,4705,4805,490Tilje Fm, 5,446.8 to 5,501.7 mTilje FmCore 3, 5,446.8 to 5,501.7 mCore 354.9 m

What it was cut through

UnitFrom, mTo, mCore in it, m
Tilje Fm5,446.85,501.754.8

Every formation top in 6506/9-1 →

Tests and fluid samples across it

  • DST 15,431 to 5,515 mOil 0 Sm³/d · gas 180,000 Sm³/d

Full test results for the well →

Logs run across it

9 RUNS COVERING PART OF THE INTERVAL

  • QAST-VSPvertical seismic profile511 to 5,575 m
  • LWD - GR RES PWD DIRlogging while drilling · gamma ray · resistivity · pressure while drilling · directional survey564 to 5,664 m
  • PPC HDSI PPC HNGS RDTC ECRIpowered positioning caliper · spectral gamma ray (hostile environment)5,006 to 5,662 m
  • QAIT QSLT HTGC ECRI5,006 to 5,663 m
  • QLDT QCNT GR ECRIgamma ray5,006 to 5,665 m
  • XPT HTGC ECRIformation pressure tester (PressureXpress)5,294 to 5,541 m
  • XPT HTGC ECRIformation pressure tester (PressureXpress)5,294 to 5,655 m
  • PQ HY PO SC MS GR ECRIgamma ray5,341 to 5,538 m
  • SC PA PO MS GR ECRIgamma ray5,479 to 5,539 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/5980/cores/3, documented in the API reference.