NORWAY · WELLBORES · NPDID 6123
6507/3-7
Exploration · Wildcat · P&A · Gas · StatoilHydro Petroleum AS · Idun Nord · PL 159 D
Core 2
Core 2 of 6507/3-7 was cut from 3,601.4 to 3,653 m, 51.6 m in the Not Fm, Ile Fm, and Ror Fm. The Directorate lists core samples from it as available.
- 51.6
- m cored · 3,601.4 to 3,653
- 3
- formation boundaries crossed
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- VSPvertical seismic profile891 to 3,848 m
- MWD LWD - PP ARCRES GVRmeasurement while drilling · logging while drilling · geoVISION resistivity2,205 to 3,855 m
- CMR ECScombinable magnetic resonance · elemental capture spectroscopy3,541 to 3,854 m
- FMI PPC MSIP PPCformation micro-imager · powered positioning caliper · modular sonic imaging platform (Sonic Scanner)3,541 to 3,855 m
- HRLA PEX HNGShigh-resolution laterolog array · Platform Express (resistivity, density, neutron) · spectral gamma ray (hostile environment)3,541 to 3,855 m
- MDT PREmodular formation dynamics tester3,546 to 3,832 m
- MDT PACKERmodular formation dynamics tester3,605 to 3,632 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/6123/cores/2, documented in the API reference.