NORWAY · WELLBORES · NPDID 6260

1/3-12 S

Exploration · Wildcat · P&A · Dry · BG Norge AS · PL 297

1 document: reports, logs, and plots →

What was run in 1/3-12 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
LWD - PP DIRLWD logging while drilling · DIR directional survey118219
LWD - PP ARC9LWD logging while drilling · ARC9 array resistivity compensated2194,207
LWD - PP DIRLWD logging while drilling · DIR directional survey2191,150
LWD - HEL BAP MFRLWD logging while drilling4,2075,913

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30212362190LOT
Surf.cond.201,132261,1500LOT
Interm.13 3/84,20217 1/24,2070LOT
Interm.9 5/85,40012 1/45,4120LOT
Open hole—5,9318 1/25,9310LOT

Drilling mud

18 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
2191.6160Gel-chem
2191.03170Gel-chem
2191.32130Gel-chem
1,0161.67490Carbosea
1,1501.65360Carbosea
1,1501.14100Gel-chem
1,9281.67420Carbosea
3,0021.67430Carbosea
3,2501.91630Carbosea
3,5941.67450Carbosea
4,2071.69450Carbosea
4,2071.67510Carbosea
4,8931.86550Carbosea
5,4122.0950Carbosea
5,5922.24510Enviromul
5,8762.22490Carbosea
5,9032.22470Enviromul
5,9312.22490Magma-teq

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/6260, documented in the API reference.