NORWAY · WELLBORES · NPDID 6661
6305/5-C-3 H
Exploration · Wildcat · Plugged · Dry · A/S Norske Shell · PL 209 BS
What was run in 6305/5-C-3 H and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| MWD - GR RES GYRMWD measurement while drilling · GR gamma ray · RES resistivity | 1,039 | 2,003 |
| LWD - GP ABG EWR DGRLWD logging while drilling · EWR electromagnetic wave resistivity · DGR dual gamma ray | 1,996 | 2,907 |
| LWD - AFR ABG EWR DGR ALD CAL CTLWD logging while drilling · EWR electromagnetic wave resistivity · DGR dual gamma ray · ALD azimuthal litho-density · CAL caliper | 2,910 | 3,130 |
| LWD - ABG EWR DGR PWD PCDC ALD CLWD logging while drilling · EWR electromagnetic wave resistivity · DGR dual gamma ray · PWD pressure while drilling · ALD azimuthal litho-density | 3,130 | 3,822 |
| XMR SDL STX6 MCI GRSDL spectral density log · GR gamma ray | 3,617 | 4,633 |
| LWD - ABG RES DEN NEU GR DIR FTWLWD logging while drilling · RES resistivity · DEN density · NEU neutron · GR gamma ray · DIR directional survey | 3,822 | 4,632 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 1,036 | 36 | 1,039.5 | 0 | — |
| Interm. | 20 | 1,996 | 26 | 2,003 | 1.44 | FIT |
| Interm. | 13 5/8 | 2,901 | 17 1/2 | 2,907 | 1.38 | FIT |
| Liner | 11 7/8 | 3,128.7 | 12 1/4 | 3,130 | 1.58 | FIT |
| Liner | 9 5/8 | 3,819 | 10 5/8 | 3,822 | 1.85 | FIT |
| Open hole | — | 4,632 | 8 1/2 | 4,632 | 0 | — |
Drilling mud
18 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 995 | 1.3 | 0 | 9.5 | Other |
| 2,003 | 1.3 | 0 | 14.3 | Kpm kcl polymer |
| 2,003 | 1.37 | 0 | 19.1 | Kcl brine |
| 2,003 | 1.3 | 0 | 4.7 | Innovert obm |
| 2,003 | 1.3 | 0 | 4.7 | Innovert obm |
| 2,003 | 1.3 | 0 | 14.3 | Kpm kcl polymer |
| 2,005 | 1.3 | 0 | 4.3 | Innovert obm |
| 2,223 | 1.34 | 0 | 7.6 | Innovert obm |
| 2,330 | 1.35 | 0 | 8.6 | Innovert obm |
| 2,428 | 1.37 | 0 | 7.6 | Innovert obm |
| 2,503 | 1.37 | 0 | 2.8 | Baraecd 2.3 |
| 2,775 | 1.71 | 0 | 10.5 | Baraecd 2.31_0806 |
| 2,783 | 1.37 | 0 | 8.1 | Innovert obm |
| 2,910 | 1.29 | 0 | 3.3 | Innovert |
| 3,288 | 1.48 | 0 | 5.2 | Baraecd 2.3 |
| 3,826 | 1.63 | 0 | 4.3 | Baraecd 2.3 |
| 4,632 | 1.65 | 0 | 8.6 | Baraecd 2.3 |
| 4,632 | 1.7 | 0 | 7.6 | Baraecd 2.3 |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/6661, documented in the API reference.