NORWAY · WELLBORES · NPDID 7175

16/2-17 B

Exploration · Appraisal · P&A · Shows · Statoil Petroleum AS · Johan Sverdrup · PL 265

1 document: reports, logs, and plots →

Core 3

Core 3 of 16/2-17 B was cut from 2,130.5 to 2,140.5 m, 10 m in the Åsgard Fm and Basement. The Directorate lists core samples from it as available.

10
m cored · 2,130.5 to 2,140.5
1
formation boundary crossed
4
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,130.52,140.5 m2,1322,1342,1362,138Åsgard Fm, 2,130.5 to 2,133 mÅsgard FmBasement, 2,133 to 2,140.5 mBasementCore 3, 2,130.5 to 2,140.5 mCore 310 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Åsgard Fm2,130.52,1332.5
Basement2,1332,140.57.5

Every formation top in 16/2-17 B →

Logs run across it

4 RUNS COVERING PART OF THE INTERVAL

  • MSIP AITmodular sonic imaging platform (Sonic Scanner) · array induction tool1,321 to 2,205 m
  • HNGS PEX ONMI2 UBIspectral gamma ray (hostile environment) · Platform Express (resistivity, density, neutron) · ultrasonic borehole imager1,780 to 2,196 m
  • MWD - PD ARCVRES6measurement while drilling · arcVISION array resistivity2,087 to 2,200 m
  • MDT PR MINIDSTmodular formation dynamics tester2,133 to 2,140 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/7175/cores/3, documented in the API reference.