NORWAY · WELLBORES · NPDID 7285
16/5-5
Exploration · Appraisal · P&A · Shows · Lundin Norway AS · Solveig · PL 410
Core 3
Core 3 of 16/5-5 was cut from 1,952.5 to 1,957.9 m, 5.4 m in the Hegre Gp. The Directorate lists core samples from it as available.
- 5.4
- m cored · 1,952.5 to 1,957.9
- 8
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Hegre Gp | 1,952.5 | 1,957.9 | 5.4 |
Logs run across it
8 RUNS COVERING PART OF THE INTERVAL
- GR VSPgamma ray · vertical seismic profile1,109 to 2,069 m
- MWD-GR RES PWD DIR CAL DEN NEU Smeasurement while drilling · gamma ray · resistivity · pressure while drilling · directional survey · caliper · density · neutron1,860 to 2,084 m
- GR CN ZDL ZMAC ORIT RTEX MLLgamma ray · compensated neutron · compensated Z-densilog · orientation tool · microlaterolog1,878 to 2,081 m
- GR FLEX MREXgamma ray · magnetic resonance explorer1,878 to 2,081 m
- GR STAR ORIT UXPLgamma ray · acoustic and resistivity imager · orientation tool1,878 to 2,075 m
- GR MAXCORgamma ray1,905 to 2,020 m
- GR RCX IFX SENTINELgamma ray1,936 to 2,050 m
- GR RCX IFX SPgamma ray · spontaneous potential1,936 to 1,970 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/7285/cores/3, documented in the API reference.