30/6-7
Exploration · Appraisal · P&A · Oil/gas · Norsk Hydro Produksjon AS · Oseberg · PL 053
Core 10
Core 10 of 30/6-7 was cut from 2,762 to 2,778.8 m, 16.8 m in the Oseberg Fm. The Directorate lists core samples from it as available.
- 16.8
- m cored · 2,762 to 2,778.8
- 5
- photographs
- 1
- palynology slide made from core
- 10
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
5 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Oseberg Fm | 2,762 | 2,778.8 | 16.8 |
Palynology slides made from core
1 IN THE INTERVAL
| Depth | Lab code | In |
|---|---|---|
| 2,765.1 m | RRI | Oseberg Fm |
Logs run across it
10 RUNS COVERING PART OF THE INTERVAL
- CCL GRcasing collar locator · gamma ray130 to 2,928 m
- DIFL LS BHC GR SPdual induction focused log · borehole-compensated sonic · gamma ray · spontaneous potential137 to 3,232 m
- VELOCITYvelocity (check-shot) survey230 to 3,232 m
- CDL CNL CR CNLcompensated densilog · compensated neutron log952 to 3,233 m
- HRD2,000 to 3,232 m
- CBL VDLcement bond log · variable density log2,250 to 2,928 m
- CSTsidewall core sample taker2,444 to 2,908 m
- MWDmeasurement while drilling2,475 to 2,885 m
- DLL MLL GR CALdual laterolog · microlaterolog · gamma ray · caliper2,600 to 2,908 m
- FMTformation multi-tester2,633 to 2,775 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/73/cores/10, documented in the API reference.