NORWAY · WELLBORES · NPDID 7428

6507/5-7

Exploration · Wildcat · P&A · Dry · E.ON E&P Norge AS · PL 558

1 document: reports, logs, and plots →

What was run in 6507/5-7 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
MWD - DIRMWD measurement while drilling · DIR directional survey477508
MWD - DIR GR RES PWDMWD measurement while drilling · DIR directional survey · GR gamma ray · RES resistivity · PWD pressure while drilling689720
MWD - DIR PWDMWD measurement while drilling · DIR directional survey · PWD pressure while drilling689720
MWD - DIR GR RES PWD DEN POR SONMWD measurement while drilling · DIR directional survey · GR gamma ray · RES resistivity · PWD pressure while drilling · DEN density · POR porosity · SON sonic1,2651,296
MWD - DIR RES GR PWD DEN POR SONMWD measurement while drilling · DIR directional survey · RES resistivity · GR gamma ray · PWD pressure while drilling · DEN density · POR porosity · SON sonic1,5661,598

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30502365070—
Surf.cond.13 3/871617 1/27200—
Pilot hole—7209 7/87200—
Interm.9 5/81,29512 1/41,2960—
Open hole—1,5988 1/21,5980—

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/7428, documented in the API reference.