NORWAY · WELLBORES · NPDID 7550
6707/10-3 S
Exploration · Wildcat · P&A · Gas · Centrica Resources (Norge) AS · PL 528 B
Core 4
Core 4 of 6707/10-3 S was cut from 4,330 to 4,358.5 m, 28.5 m in the Lysing Fm and Lange Fm. The Directorate lists core samples from it as available.
- 28.5
- m cored · 4,330 to 4,358.5
- 6
- thin sections in the interval
- 1
- formation boundary crossed
- 4
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
What it was cut through
Thin sections in this interval
6 ON FILE
Logs run across it
4 RUNS COVERING PART OF THE INTERVAL
- VIVSP2,113 to 4,780 m
- PEX AIT HNGSPlatform Express (resistivity, density, neutron) · array induction tool · spectral gamma ray (hostile environment)3,300 to 4,387 m
- LWD - GR APWD DEN RES POR DI FPTlogging while drilling · gamma ray · annular pressure while drilling · density · resistivity · porosity4,300 to 4,398 m
- MDTmodular formation dynamics tester4,322 to 4,348 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/7550/cores/4, documented in the API reference.