NORWAY · WELLBORES · NPDID 7948

30/11-13

Exploration · Wildcat · P&A · Gas/condensate · Statoil Petroleum AS · Munin · PL 272

1 document: reports, logs, and plots →

What was run in 30/11-13 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
MWD - GR RESMWD measurement while drilling · GR gamma ray · RES resistivity1713,344
AIT HNGS SON SCANAIT array induction tool · HNGS spectral gamma ray (hostile environment) · SON sonic2,4473,344
XPT PEX ECS CMRXPT formation pressure tester (PressureXpress) · PEX Platform Express (resistivity, density, neutron) · ECS elemental capture spectroscopy · CMR combinable magnetic resonance2,8293,338
MDT CMRMDT modular formation dynamics tester · CMR combinable magnetic resonance2,9783,336
XL ROCK2,9813,316

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30171361710—
Surf.cond.13 3/81,31017 1/21,3180—
——1,332—01.49FIT
Liner9 5/82,82912 1/42,8300—
——2,833—01.5FIT
Open hole—3,3448 1/23,3440—

Drilling mud

9 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
1341.390Bentonite/polymer mud
1711.0490Spud mud
1,1701.3140Bentonite/polymer mud
1,3291.41240Xp-07
2,0831.39240Xp-07
2,6091.39250Xp-07
2,8901.23170Xp-07
3,1101.23170Xp-07
3,3441.23160Xp-07

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/7948, documented in the API reference.