NORWAY · WELLBORES · NPDID 8332

24/9-12 A

Exploration · Appraisal · P&A · Oil/gas · Aker BP ASA · Bøyla · PL 340

1 document: reports, logs, and plots →

What was run in 24/9-12 A and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
T2 - LWD - DIR GR RES NEU DEN PRLWD logging while drilling · DIR directional survey · GR gamma ray · RES resistivity · NEU neutron · DEN density1,3183,000
LWD - DIR GR RES NEU DEN PR NMRLWD logging while drilling · DIR directional survey · GR gamma ray · RES resistivity · NEU neutron · DEN density1,3701,553

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor36154.536154.50—
Open hole—3,0009 1/23,0000—

Drilling mud

10 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
9201.0200Ems 4600
9201.42270Ems 4600
1,2411.39250Ems 4600
1,2411.41270Ems 4600
1,3251.41260Ems 4600
1,3251.39250Ems 4600
1,9501.4240Ems 4600
2,3361.41250Ems 4600
2,5991.4230Ems 4600
3,0001.42260Ems 4600

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/8332, documented in the API reference.