NORWAY · WELLBORES · NPDID 8704
16/5-8 S
Exploration · Wildcat · P&A · Oil · Lundin Norway AS · PL 815
Core 2
Core 2 of 16/5-8 S was cut from 2,201 to 2,205 m, 4 m in the Åsgard Fm and Basement. The Directorate lists core samples from it as available.
- 4
- m cored · 2,201 to 2,205
- 1
- formation boundary crossed
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- FMI MSIP GRformation micro-imager · modular sonic imaging platform (Sonic Scanner) · gamma ray129 to 2,468 m
- VSI GRversatile seismic imager · gamma ray406 to 2,464 m
- CMR NEXT XPT GRcombinable magnetic resonance · formation pressure tester (PressureXpress) · gamma ray2,009 to 2,468 m
- UBI HRLA PEX HNGS GRultrasonic borehole imager · high-resolution laterolog array · Platform Express (resistivity, density, neutron) · spectral gamma ray (hostile environment) · gamma ray2,009 to 2,463 m
- XLR GRgamma ray2,018 to 2,446 m
- LWD - RES GR PWD DIR D C N R IMGlogging while drilling · resistivity · gamma ray · pressure while drilling · directional survey2,168 to 2,468 m
- FTNG GRgamma ray2,201 to 2,252 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/8704/cores/2, documented in the API reference.