NORWAY · WELLBORES · NPDID 9283

35/11-25 S

Exploration · Wildcat · Plugged · Dry · Equinor Energy AS · PL 090

What was run in 35/11-25 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
LWD - GR RES ECD DIRLWD logging while drilling · GR gamma ray · RES resistivity · ECD equivalent circulating density · DIR directional survey4011,579
LWD - GR RES ECD DIR DEN NEU FMPLWD logging while drilling · GR gamma ray · RES resistivity · ECD equivalent circulating density · DIR directional survey · DEN density · NEU neutron1,5792,819
LWD - GR RES ECD DIR DEN NEU SONLWD logging while drilling · GR gamma ray · RES resistivity · ECD equivalent circulating density · DIR directional survey · DEN density · NEU neutron · SON sonic2,8193,187

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Interm.20754.7267581.41—
Interm.13 3/81,571161,5821.57FIT
Liner9 5/82,818.312 1/42,822.31.71LOT
Open hole—3,1878 1/23,1870—

Drilling mud

6 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
7481.212110Carbosea
1,5141.36257Carbosea
1,5791.212110Carbosea
1,6051.36309Carbosea
2,8221.2156Synteq
3,1871.2156.5Synteq

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/9283, documented in the API reference.