NORWAY · WELLBORES · NPDID 943

34/4-7

Exploration · Appraisal · P&A · Oil · Saga Petroleum ASA · Snorre · PL 057

7 documents: reports, logs, and plots →

Core 7

Core 7 of 34/4-7 was cut from 2,647 to 2,656.5 m, 9.5 m in the Lunde Fm. The Directorate lists core samples from it as available.

9.5
m cored · 2,647 to 2,656.5
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,6472,656.5 m2,6482,6502,6522,654Lunde Fm, 2,647 to 2,656.5 mLunde FmCore 7, 2,647 to 2,656.5 mCore 79.5 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Lunde Fm2,6472,656.59.5

Every formation top in 34/4-7 →

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • VELOCITYvelocity (check-shot) survey907 to 2,926 m
  • DIFL LSBHC GRdual induction focused log · gamma ray1,872 to 2,939 m
  • DIPLOGdipmeter1,872 to 2,941 m
  • MWDmeasurement while drilling1,887 to 2,950 m
  • COREGUNsidewall core gun1,984 to 2,925 m
  • CDL CNL GRcompensated densilog · compensated neutron log · gamma ray2,472 to 2,940 m
  • FMT HPformation multi-tester2,509 to 2,874 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/943/cores/7, documented in the API reference.