TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 7.4 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,000-0-2,000-4,000-6,000SUBSEA FTA2,584 FT ELB2,523 FT ELDeanDeanSpraberrySpraberryStrawnStrawnMississippianMississippian

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ALMT #1
  • BGail 9 #1PU
FormationAB
Santa Rosa-Gau Protection2,274 MD 310—
Santa Rosa - Gau Protection2,274 MD 310—
Rustler-Gau Protection1,484 MD 1,100—
Rustler - Gau Protection1,484 MD 1,100—
Yates1,024 MD 1,560—
San Andres94 MD 2,490—
San Andres - High Flows, H2S, Co94 MD 2,490—
Leonard-2,281 MD 4,865LEONARD LIME—
Spraberry-2,696 MD 5,280-3,042 MD 5,565
Upper Spraberry—-3,042 MD 5,565
Lower Sprayberry—-3,302 MD 5,825
Lower Spraberry—-3,302 MD 5,825
Dean-3,666 MD 6,250-2,742 MD 5,265
Wolfcamp-4,292 MD 6,876—
Wolfcamp - Strong Water Flows-4,292 MD 6,876—
Pennsylvania-5,488 MD 8,072—
Strawn-5,488 MD 8,072-5,482 MD 8,005
Pennsylvanian-5,488 MD 8,072—
Mississippian-5,820 MD 8,404-5,850 MD 8,373MISS LIME
Ellenburger—-6,060 MD 8,583

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.