NORWAY · WELLBORES · NPDID 6332

6506/9-2 S

Exploration · Wildcat · P&A · Gas/condensate · Centrica Resources (Norge) AS · PL 433

4 documents: reports, logs, and plots →

Core 1

Core 1 of 6506/9-2 S was cut from 4,342 to 4,368.7 m, 26.7 m in the Garn Fm. The Directorate lists core samples from it as available.

26.7
m cored · 4,342 to 4,368.7
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS4,3424,368.7 m4,3454,3504,3554,3604,365Garn Fm, 4,342 to 4,368.7 mGarn FmCore 1, 4,342 to 4,368.7 mCore 126.7 m47.3 m not cored

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Garn Fm4,3424,368.726.7

Every formation top in 6506/9-2 S →

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • VSIversatile seismic imager2,196 to 4,795 m
  • AIT GPI PPC DSI GRarray induction tool · powered positioning caliper · dipole shear sonic imager · gamma ray4,196 to 4,997 m
  • LDS APS HNGSlitho-density sonde · accelerator porosity sonde · spectral gamma ray (hostile environment)4,196 to 4,799 m
  • MDTmodular formation dynamics tester4,333 to 4,594 m
  • MDTmodular formation dynamics tester4,334 to 4,463 m
  • MSCTmechanical sidewall coring tool4,345 to 4,386 m
  • MDTmodular formation dynamics tester4,676 to 4,358 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/6332/cores/1, documented in the API reference.