NORWAY · WELLBORES · NPDID 6332
6506/9-2 S
Exploration · Wildcat · P&A · Gas/condensate · Centrica Resources (Norge) AS · PL 433
Core 2
Core 2 of 6506/9-2 S was cut from 4,416 to 4,471 m, 55 m in the Ile Fm. The Directorate lists core samples from it as available.
- 55
- m cored · 4,416 to 4,471
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Ile Fm | 4,416 | 4,471 | 55 |
Palynology slides made from core
0 IN THE INTERVAL
1 more slide was made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- VSIversatile seismic imager2,196 to 4,795 m
- AIT GPI PPC DSI GRarray induction tool · powered positioning caliper · dipole shear sonic imager · gamma ray4,196 to 4,997 m
- LDS APS HNGSlitho-density sonde · accelerator porosity sonde · spectral gamma ray (hostile environment)4,196 to 4,799 m
- MDTmodular formation dynamics tester4,333 to 4,594 m
- MDTmodular formation dynamics tester4,334 to 4,463 m
- LWD - GEOVIS ECOS SONVISlogging while drilling · sonicVISION sonic4,369 to 4,805 m
- MDTmodular formation dynamics tester4,676 to 4,358 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/6332/cores/2, documented in the API reference.