NORWAY · WELLBORES · NPDID 9953
6406/3-12 S
Exploration · Appraisal · P&A · Oil/gas · Wintershall Dea Norge AS · PL 836 S
Core 1
Core 1 of 6406/3-12 S was cut from 4,360 to 4,468.9 m, 108.9 m in the Tilje Fm, Båt Gp, and Åre Fm. The Directorate lists core samples from it as available.
- 108.9
- m cored · 4,360 to 4,468.9
- 1
- formation boundary crossed
- 11
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
Logs run across it
11 RUNS COVERING PART OF THE INTERVAL
- PCC NGIT SFT EDTC LEHtelemetry cartridge with gamma ray4,083 to 4,528 m
- QAIT ILE HAPS HLDS LDSC PPC MASThostile litho-density sonde · powered positioning caliper4,085 to 4,528 m
- NGI MSIP HXPTmodular sonic imaging platform (Sonic Scanner)4,108 to 4,785 m
- QAIT APS HLDS MSIP NGIaccelerator porosity sonde · hostile litho-density sonde · modular sonic imaging platform (Sonic Scanner)4,108 to 4,785 m
- CMR XPTcombinable magnetic resonance · formation pressure tester (PressureXpress)4,113 to 4,537 m
- LWD - GR PWD RES DIR DEN CAL NEWlogging while drilling · gamma ray · pressure while drilling · resistivity · directional survey · density · caliper4,115 to 4,528 m
- MCST4,122 to 4,544 m
- XLR4,122 to 4,488 m
- MDTmodular formation dynamics tester4,169 to 4,483 m
- HXPT4,318 to 4,459 m
- HXPT CMRcombinable magnetic resonance4,450 to 4,785 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/9953/cores/1, documented in the API reference.