NORWAY · WELLBORES · NPDID 9953

6406/3-12 S

Exploration · Appraisal · P&A · Oil/gas · Wintershall Dea Norge AS · PL 836 S

Core 2

Core 2 of 6406/3-12 S was cut from 4,601.1 to 4,641.2 m, 40.1 m in the Åre Fm. The Directorate lists core samples from it as available.

40.1
m cored · 4,601.1 to 4,641.2
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS4,601.14,641.2 m4,6054,6104,6154,6204,6254,6304,635Åre Fm, 4,601.1 to 4,641.2 mÅre FmCore 2, 4,601.1 to 4,641.2 mCore 240.1 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Åre Fm4,601.14,641.240.1

Every formation top in 6406/3-12 S →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • NGI MSIP HXPTmodular sonic imaging platform (Sonic Scanner)4,108 to 4,785 m
  • QAIT APS HLDS MSIP NGIaccelerator porosity sonde · hostile litho-density sonde · modular sonic imaging platform (Sonic Scanner)4,108 to 4,785 m
  • HXPT CMRcombinable magnetic resonance4,450 to 4,785 m
  • LWD - GR PWD RES DIR DEN CAL NEUlogging while drilling · gamma ray · pressure while drilling · resistivity · directional survey · density · caliper · neutron4,528 to 4,785 m
  • PSXLD SAT MSRLD POHP IFA SOEXTin-situ fluid analyzer4,535 to 4,772 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/9953/cores/2, documented in the API reference.